Detailed Product Description

                                                   CDD-10 waterproofing membrane

Description

      YOUNGEN CDD-10 is a high-elasticsingle pack water based waterproofing membrane. Which is capable of keeping the elasticity and waterproofing function for a long time, due to its excellent weatherability and UV resistibility. It is suitable for coating the surface of indoor, outdoor, horizontal and vertical wet  areas such as showersbathroomsterracesbalconiesroofs, which can be tiled over if required, using cement based adhesives. 

       YOUNGEN CDD-10 waterproofing membrane have been fully tested in accordance with AS/NZS4858-2004 <Wet  Area  Membranes> and meets all requirements shown on CSIRO Test Report No. 3778.

Technical Data

 1.Elongation                                                 560%

 2.Tensile Strength                                         4.0MPa

 3.Water Immersion Test-56 days                    PASS

 4.Bleach Immersion Test-56 days                   PASS

 5.Detergent Immersion Test-56 days               PASS

 6.Heat Ageing                                               PASS

 7.Cyclic Movement Test                                 PASS

 8.Water Absorption Test                                1.87%

 9.Vapour Transmission Test                           PASS

Features and Benefits

 1.water dispersible, solventliss, nontoxic, non-flammable

 2.excellent weatherability of the waterproof coating

 3.flexible, high-elastic, can fill and cover cracks perfectly

 4.long-lasting protect for the substrate

 5.high-strength and durability

 6.can mould the skidproof ground by mixing with water- washing sands or quartz sands

 7.well compatibility with cement based adhesives if tiling is required

 8. Easy to apply.

Uses

1.  A total minimum coverage of 1.5 liters /m² is recommended.

2.  Ensure subsequent coats are applied in an opposite direction to the previous.

3.  All the cracks/joints, irrespective of their width, must be filled with the silicone sealant, then 50mm wide polyethylene tape / polypropylene tape / bondage/mesh should be placed over thecrack/joint,ensuring it adheres to the surface.